Facilities and Equipment that help us help you with your process equipment

The following is a list of the Facilities and Equipment that help us help you with your process equipment:

Summit gap bed lathe 33” swing over bed (43” swing in gap) x 80” center to center

Hendey lathe 30” swing over bed x 60” center to center

Monarch lathe 27” swing over bed x 120” center to center

Monarch lathe 20” swing over bed x 48” center to center

South Bend turret lathe 16” swing over bed with 6-station power feed turret

South Bend lathe 10” swing over bed x 18” center to center

Bullard 36" Vertical Turret lathe

Sheldon speed lathe

Shop built speed lathes

Holdridge model 8-D radii cutter set

Giddings & Lewis 4” spindle diameter horizontal boring mill with tailstock

Collet & Engelhard 85mm spindle diameter horizontal boring mill with built in rotary table and built in facing head

Kearney & Trecker universal horizontal milling machine

Grizzly knee type milling machine

Cincinnati Bickford 32” swing drill press with #4 Morse taper spindle

Excelsior 20” swing drill press with #3 Morse taper spindle

Clausing 20” swing drill press with Quadrill 4-station turret head

Delta 17” drill presses with #2 Morse taper spindles (3)

Walker Turner drill press head mounted on large table (36" swing)

Craftsman 15” drill press

Plate bending rolls (2)

Bux magnetic drill with 3/4" chuck

Several handheld electric drills. Largest one has a #3 Morse taper

Craftsman 10” table saw with 2 HP motor

Delta (Uni-Saw) 10” table saw with 5 HP motor

Panel saw with capacity of up to 5’ width (by infinite length) panels

Various miter saws, Skil saws and other wood working tools and equipment for building crates

Sand blast cabinet

Large heavy-duty sand blaster

Multiple air compressors up to 25 hp

Hot pressure washer

Vulcanizer for splicing O-rings with up to a 1-3/4" diameter cross-section

Chevalier 6” x 18” surface grinder

J.G. Blount Wet Grinder

American Broach and Machine Co. Broaching Press

Rigid 535 threader with individual (mono) pipe dies from 1/8” through 2”, nipple chuck, universal dies, more than a dozen mono die heads with bolt dies, etc.

Rigid 700 threader with dies

Ridgid model 141 die head (2-1/2" to 4" capacity)

Pipe wrenches through 4’ including two large compound leverage wrenches

Rigid tri-stand pipe vises (4)

Foldable stands with screw-adjustable V-tops 2,500 lb. capacity each (8)

Cast iron miter clamps with capacity of 4” square tubing (4)

Lever and geared type tubing benders from ¼” through 1” O.D. tube

Abrasive blast cabinet

Vibratory parts deburrer

Safety Kleen parts washer (2)

Stroke sander with 6” wide abrasive belt

Various stationary belt and disc sanders

Portable flex-shaft grinders (7)

More than 80 handheld grinders, sanders and polishers of various types

Georg Fischer model RA4 tube & pipe cutter & beveler

Birkestrand tube facers with dies for up to 3” O.D. tube (3)

Peerless extra heavy duty vertical blade power hacksaw with capacity of 18” x 18” or 24” x 10”

Marvel No. 18 heavy duty mitering power hacksaw with 18" x 18" capacity

Several misc. chop saws, and band saws

Dake 75-ton hydraulic press

Greenerd no. 7, floor standing, compound leverage, ratcheting arbor press 35-ton capacity

Greenerd no. 3-3/4, floor standing, compound leverage, ratcheting arbor press 5-ton capacity

2-ton arbor press

Shop built 100-ton gear puller with various sets of tie-bolts up to a set of four 2” diameter by 6-1/2’ long

Simplex Util-A-Tool screw type push-pull tools with chains & other accessories (2)

Several hand operated 10,000 psi hydraulic porta-power pumps

Pneumatic powered 10,000 psi hydraulic porta-power pump

Greenlee model 797 gas engine powered 10,000 psi hydraulic pump

Porta-power hydraulic jack cylinders including 2-1/2, 5, 10, 25, 30, 50 and 100 ton

More than 10 standard duty hydraulic bottle jacks of various capacities up to 20 ton

Two 10/20-ton hydraulic toe jacks

Three extra heavy duty 30-ton hydraulic bottle jacks

One extra heavy duty 50-ton hydraulic bottle jack

Simplex model 24A ratchet toe jacks 15 ton (4)

Floor jacks from 2-ton to 10-ton capacity

Various jack stands up to 10-ton capacity

Machinery moving skates 12-ton capacity each (8)

Machinery moving skates 50-ton capacity each (2)

Custom built machinery moving skates with 3-1/2” wide by 12” diameter hard rubber tire wheels. Skates with 8 wheels (3) skate with 4 wheels (1)

LaPlant-Choate four-wheel dollies with hard rubber tires. Each dolly rated at 50 ton (3)

Numerous MIG & TIG welding machines with capacity up to 450 amps at 100% duty cycle

AGM stud welder

Oxy-acetylene torch set on cart

Plasma cutter

Air-Arc Cutting/Gouging equipment

Various work benches and welding benches including two with 1” thick machined tops

Weldsale 5' x 8' platen table

Ransome welding positioners (3)

Various shop-built welding positioners

Mobile shop cranes (3)

Several gantry cranes both stationary and mobile from 1 through 10-ton capacity

Custom built modular “gallows style” four-post gantry that was purchased from a retired rigger. It was once used to stand up and then lower a forging press weighing 150 tons into a floor pit. Gantry can be assembled over 30 feet high

More than a dozen overhead chain hoists from ¼ to 10-ton capacity

Various beams, solid lifting rods, cribbing blocks and other rigging tools

Dozens of screw pin shackles with pin diameters up to 2-1/2”

Dozens of large eyebolts. The bolt size on the largest one is 2” diameter x 4-1/2 threads per inch

Various beam clamps and beam trollies up to 5-ton capacity

Several chain type come-a-longs with capacities up to 6-ton

One large custom build modular stand that was made to support the drive bonnet of a Ross model HDM-200 mixer during a total machine rebuild

Hydraulic powered winch with 150’ of 7/8” wire rope and a rated single line pull of 45,000 lbs. Winch is driven by a self-contained hydraulic system with a 20 HP electric motor

Custom built anchor plates that get bolted to the floor with eight 5/8” anchors for use with above winch to move heavy equipment

Various cable snatch blocks with capacities of up to 1” diameter wire rope

Large assortment of heavy-duty cable slings, chains, shackles, large pry bars, Johnson bars, etc.

Several 6,000 lb. capacity portable hydraulic scissor lift tables

White 2,500 lb. solid tire forklift

Caterpillar 8,000 lb. semi-pneumatic tire forklift (2)

TCM 9,000 lb. pneumatic tire forklift

Hyster 18,000 lb. pneumatic tire forklift